Carbon steel manufacturers 
Seamless Steel Pipe  
LSAW Steel Pipe 
ERW Steel Pipe 
SSAW Steel Pipe 
Oil Steel Pipe 
Gas Steel Pipe 
Tube Casing 
Galvanized steel pipe 
Welded steel pipe 

Address£º #112,Fuyuan Ave,Xinsha Industrial Zone,Changsha,Hunan.China
Postcode£º 410199

General Enquiry :

TEL: 0086-731-89878292

Spiral pipe welding joint types and characteristics
publishers£º¹ÜÀíÔ± Release time£º2012-4-27 9:43:08 read£º3134times

Spiral steel pipe weld types:
Strip head weld: steel strip head weld is spiral seam weld pipe, steel sheet or strip end to end.
Butt weld: two parts steel pipe connected to the formation of circular welds.
Locate welds: final welding for fixed butt edge of the weld.

Spiral pipe characteristics: welded pipe production process is simple, high efficiency, low cost, rapid development. The strength of the spiral welded pipe is generally higher than the Longitudinal, can narrow the billet production of large diameter pipe, you can also use the same width of the billet production of different diameters of pipe.However, compared with the same length of straight seam pipe, the weld length increased by 30 to 100%, and lower production rate.

Spiral Pipe thermal fatigue generally refers to the stability of the work in the cold, heat alternating effect the ability to resist cracks. Thermal fatigue crack due to cold, heat alternating crack said.


   [ Print this page ] [Close] [top]
carbon Steel Pipe LSAW Steel Pipe ERW Steel Pipe SSAW Steel Pipe SEAMLESS Steel Pipe
Copyright 2011,carbon-pipe .All rights reserved.